HOME PRODUCTS SERVICES CONTACT US
THERMOGENICS INC.
Thermocoil 2000
Automatic Packages Once-Through Coil Tube Generators for unattended operation in specific jurisdictions. Low and High Pressure Steam applications from 40 to 200 BHP.

Efficiency 40 BHP to 200 BHP output.
Standard 15 PSIG to 2700 PSIG
Fuels
Natural Gas and Number 2 Oil.
Efficiency
Up to 85% efficiency with economizers.
Codes
ASME, NATIONAL BOARD or as specified. Complies with local code requirements as applicable.
Environmental
Compliance with current noise and emissions regulations.
Design and Opperation Improvements
4-20 ma fuel/water system. no servo required.
4-20 ma modulation for feedback to PLC based Lead/Lag Control.
Redesigned combustion air blower ensures quiet operation.
Complete flexibility on burner management systems.
Solid state coil temperature system with individual temperature readouts and set points.
Redesigned burner increases efficiency.
PLC based flame safeguard with optional linkageless control.
Pneumatic by-pass control systems.
Standard Equipment Features
Quick steaming 0-150 psi in less than 5 minutes.
High pressure quick disconnect hoses for ease
of maintenance.
Fully modulating burner with 8-1 turndown on
Natural Gas and #2 Oil.
All electrical boxes are oil/dust tight.
All electrical conduit liquid tight.
Switch controls and warning devices located in a
central control panel at the front of the boiler skid
for ease of operation and trouble shooting.
Separate high voltage side panel.
Heavy duty reciprocating triplex pump with
dampening device.
Coils have monitoring sensors.
Most service connections located at common
junction point.
Automatic timer controlled bottom blowdown.
Large face gauges.
Quiet compact design less than one quarter size
of conventional boilers.
Steam separator guarantees 99% plus dry
saturated steam.
Fuel to steam efficiencies up to 85% with heat
recovery.
Dry contacts for remote alarms.
Fuel to steam efficiencies up to 85% with heat recovery.

Performance Data, Sizes and Dimensions*

RATED
BOILER
CAPACITY
B.H.P.
EQUIVALENT
EVAPORATION
PPH &
AT 212ºF
THERMAL
OUTPUT BTU/HR
(KCAL/HR)
X 1000
FLUE
OUTLET
CONNECTION
INCHES (mm)
APPROXIMATE
FUEL CONSUMPTION
DIMENSIONS IN
INCHES (mm)
APPROXIMATE
SHIPPING
WEIGHT
LBS (Kg)
NATURAL GAS
SCFH
#2 FUEL OIL
GPH (Lits/H)
L
W
H
40
1,380
1,339
(337)
10
(254)
1,675
12.0
(54)
84
(2,133)
48
(1,219)
80
(2,032)
4,000
(1,818)
65
2,240
2,176
(548)
10
(254)
2,680
19.0
(86.5)
84
(2,133)
48
(1,219)
80
(2,032)
4,000
(1,818)
100
3,450
3,348
(844)
13
(330)
4,185
30.0
(136.5)
87
(2,210)
60
(1,524)
82
(2,082)
5,300
(2,409)
150
5,175
5,021
(1,266)
15
(381)
6,276
45.0
(205)
96
(2,438)
60
(1,524)
109
(2,769)
7,200
(3,292)
200
6,900
6,695
(1,688)
18
(457)
8,367
50.0
(227)
96
(2,438)
63
(1,600)
106
(2,692)
7,700
(3,500)
* Subject to change without notice. Oil fired available for #2 and diesel oil only.
*The descriptions and specifications contained in this website are approximate and were in effect at the time.
Thermogenics policy is one of continuous improvement and update. Changes to specific models may occur at anytime without notice or incurring any obligation.
Download the PDF version of this page.
Copyright © 2006 Thermogenics Inc. All rights reserved.